Are you facing slow internet speed in your office and house? If your reply or response is YES then don’t worry. We will tell you the five simple and easy tips by which you can boost the range of your existing router WiFi signal.
Pick Half-Way Location For The Router
When you settle your router device near the wall you can face the slow speed of the internet. The central location of your house and office is the best location to settle your router. By doing this, without any disturbance, you enjoy the full WiFi coverage signal in all areas.
Swap Your Router Off The Floor
The metallic appliances, walls, and floors can absorb the WiFi signals which come from the Linksys router device. We recommend you settle your router away from these types of things.
Replace Linksys Router Antenna
The antennas of the Linksys router are usually omnidirectional, which means that the antennas provide the WiFi signal in all directions. When you settle your router near the wall then half up the WiFi signal broadcasting to the outer area. Most of the Linksys router gadgets come with removable antennas. If you change your omnidirectional antenna with the high-gain antenna, then you can easily aim the router WiiFi signal in the direction of which one you want.
Enhance Existing Router Software
When you upgrade the software of the router device, you can also boost the performance of the router. To enhance the software, you will need to visit the web management page of your router device. Now, look for an administration option and then tap on the firmware upgrade option. In the end, download the latest software file on your laptop or on your computer.
Purchase Linksys Extender Device
Linksys WiFi range extender is a device that is used to extend the range of the router’s WiFi signal. The login and setup process of the Linksys WiFi range extender is so simple and easy. To enjoy all the benefits of the Linksys extender device, read this entire page attentively.
Advantages Of Linksys Extender Device
- Linksys extender device helps to remove all the dead spots areas of offices and houses.
- In less time, increase router WiFi signal range.
- Compatible with any type of existing router.
- Due to the Linksys extender’s small size, it is very easy to handle or carry.
- Easy to purchase it from both offline and online stores at a reasonable price.
Things Required to Do Extender Login And setup Process
- Must have a computer or mobile phone.
- Keep in mind the login details.
- Als know the default web or IP portal of Linksys extender.
- Garb the working power socket.
Access Linksys Extender Login Page
- First, settle the Linksys extender power plug in the power socket.
- Now, take a WiFi gadget and connect it to the extender network.
- After that, open Safari and enter extender.linksys.com in the URL bar.
- Next, fill in all the details which are shown on the Linksys extender web management page.
- Hence, by doing this the Linksys extender login process is done.
Configure Linksys Extender- WPS Method
- First, put the Linksys extender power plug in the power socket and make sure the extender must be placed closer to the router device.
- After that, wait for a while to see the LED indicator blinking up.
- Now, push the WPS button of the Linksys extender and within 10 to 20 seconds press the router WPS button.
- Then, the solid WPS LED starts blinking on both the router and extender gadget.
- Thus it means, the extender and router are both successfully linked with each other.
Linksys Extender Installation- Wizard Setup
- Initially, place the power plug of the Linksys WFi range extender in the power socket.
- Now, take the computer and connect the computer to the Linksys range extender network.
- After that, enter extender.linksys.com in the location bar of the Web browser.
- Next, fill in the relevant details in the required field such as username and security password.
- Then, pick the extender wizard setup option and then select the WiFi network that you want to extend.
- Furthermore, fill in the details and hit on connect.
- In the end, wait for a short while to see the Extender Successfully installed notification on your display page.
After doing the Linksys range extender setup if you are facing any common issues then we recommend you follow or consider the below solution tips to fix them.
Power Cycle Linksys Extender
- In the beginning, turn off your Linksys extender device.
- After that, take out the power plug of the Linksys extender from the power socket.
- Now, wait for a few minutes and turn on your Linksys extender.
- Next, put back the power plug of the Linksys extender in the power socket.
- Thus, doing this, checks whether the issue is resolved or not.
Check The Distance Between The Extender And The Router
Due to the maximum distance between the extender and router, you can face the connection issue. To resolve the connection issue, we recommend you locate your Linksys extender device near the existing router. Approximately 10 to 15 feet gap is enough not more than that.
Far Away From Wireless Interference
Make sure don’t settle your extender or router device closer to the metal or electronic gadgets. Metal and electronic gadgets absorb all the WiFi signals which come from the router and extender device. Devices such as refrigerators, microwaves, cordless phones, etc.
Disable Extra WiFi Gadgets
When you connect those WiFi gadgets to the Linksys extender network which is not in use. We suggest you, disable all those WiFi gadgets which are not in use. If you don’t know how many WiFi gadgets connect to your extender WiFi network then you will need to visit the web management page of Linksys extender and tap on the available WiFi gadgets option.
Note: If the above tips do not help you to resolve the issue then you will need to follow the below-advanced troubleshooting tips to fix them.
Upgrade Linksys Range Extender Software
To improve the software of Linksys WiFi range extender, you will need to arrive at the web management page. Now, fill in all the details shown on the display page such as username and security password. Now, look for an administration option and then tap on firmware upgrade. After that, if you see the latest firmware file then download that file on your laptop.
Default Factory Reset
Note: If the above methods do not help you to fix the issue, then you will need to try this last method but don’t be least.
At the back side of the Linksys extender device, you can easily see the reset hole button. Push that button for 10 seconds with the help of a paper clip. Now, all the extender LEDs will turn off. As it means your device is now completely reset.
Note: After resetting the Linksys extender device, you will need to do the Linksys extender configuration process again.
With the guidance of this page, you will learn the five ways by which you can easily extend the range of existing router WiFi signals. If you are unable to extend the range with the help of these ways then you will need to ping our team and also read about how to fix linksys velop setup.
